SSD D60 XR MOD BEEF TUBES - NARROW - BRASS
These are an upgrade for the SSD D60 axle housing that benefit the rig in several ways. SSD D60 XR Mod Beef Tubes allow you to install Axial Wraith/XR10 c-hubs and knuckles along with XR10 universals to obtain up to 70 degrees of steering. They add weight down low to help the center of gravity of your rig, enabling you to run less rotating weight in the tires. They also "Beef" up the axle housing itself to help keep from snapping the housing in half. Another benefit is that they give you a solid metal mount for the c-hub screws, instead of the stock plastic that normally holds the c-hub screws and strips out easily.
They will work in both the front and rear axles.
You will receive two SSD D60 XR Mod Beef Tubes (enough for one axle).
*** The axle housing requires modifications to accept these Beef Tubes. If you choose to modify your own housing, please understand that we are not responsible for any mishaps. ***
Tube weight = 2.6 o.z. per set
Team KNK Hardware is included!
This narrow version allows you to keep the stock SSD D60 track width.