You may also like the following products.
AR60 BEEF TUBES - STEEL
Sold out
What are AR60 Beef Tubes, you ask? They are an upgrade for the Axial AR60 axles housing that benefits the rig in several ways. They add weight down low to help the center of gravity on your rig, enabling you to run less rotating weight in the tires. They also "Beef" up the axle housing itself to help keep from snapping the housing in half. Another benefit is that they give you a solid metal mount for the c-hub screws, instead of the stock thin plastic that normally holds the c-hub screws and strips out easily.
Tubes come pre-drilled, tapped, and ready to install.
Tube weight = 1.5 o.z. per set.
Team KNK Hardware is included!
Click here for installation tips.
AR60 Beef Tubes are machined so that they will work with the stock plastic housing and the Vanquish Products Version 1 Aluminum Housing with modifications. (part # VPS04301)!!!
AR60 BEEF TUBES - BRASS
Sold out
What are AR60 Beef Tubes, you ask? They are an upgrade for the Axial AR60 axles housing that benefits the rig in several ways. They add weight down low to help the center of gravity on your rig, enabling you to run less rotating weight in the tires. They also "Beef" up the axle housing itself to help keep from snapping the housing in half. Another benefit is that they give you a solid metal mount for the c-hub screws, instead of the stock thin plastic that normally holds the c-hub screws and strips out easily.
Tubes come pre-drilled, tapped, and ready to install.
Tube weight = 1.5 o.z. per set.
Team KNK Hardware is included!
Click here for installation tips.
AR60 Beef Tubes are machined so that they will work with the stock plastic housing and the Vanquish Products Version 1 Aluminum Housing with modifications. (part # VPS04301)!!!
RYFT / AR14B BEEF TUBES - ALUMINUM
What are RYFT Beef Tubes, you ask? They are an upgrade for the Axial Ryft AR14B axle housing that benefits the rig in several ways. These do not add weight down low like the brass version. They do "Beef" up the axle housing itself to help keep from snapping the housing in half. Another benefit is that they give you a stronger mounting area for the c-hubs, instead of the stock thin plastic that normally holds the c-hub and breaks easily.
***Tubes come ready to install in the front axle. If you wish to use them in the rear axle, they may fit as is. If they cause binding, simply sand 2mm of off the outside end of the Tubes. There is a discrepancy in the Axial mold. Tubes fit some rear housings perfectly and are a hair to long in others.
7075 Aluminum
Tube weight = 12 grams per set.