SCX10 II BRASS C-HUBS
Our SCX10 II Brass C-Hubs are precision machined from solid brass, not cast like may others that are available. Weighing in at 35 grams for the pair, these c-hubs feature a clamping design which has been moved to the rear of the axle vs the stock bottom location which improves ground clearance which you will not find on other brands. This upgrade offers the increased performance of a metal c-hub, with the improved stability that comes with increased unsprung weight, which is what Beef Tubes is known for. Package includes two c-hubs and hardware (Images are for reference only).
SCX10 II / AR44 BEEF SHANKS - BRASS KNUCKLES
Only a few left!
SCX10 II BEEF SHANKS - BRASS KNUCKLES
Our Beef Shanks add a total of 98 grams of weight were it counts, the lowest outer most part of your rig, lowering the overall center of gravity, increasing climbing stability/ability. Another feature that makes Beef Shanks stand above the others is that our design uses a larger and stronger 5x13x4mm outer bearing vs. the stock 5x11x4mm bearing which also increases durability. These are a direct fit to almost any AR44 c-hub and provide improved performance with increased scale realism.
- CNC Machined from solid brass
- Double shear ackerman arms for ultimate strength
- Scale fabricated knuckle appearance
- SORRCA LITE legal
- Larger outer bearing (5x13x4mm) for added strength
- Improves CG
- 49 grams each for a total of 98 grams
Includes two (2) SCX10 II / AR 44 Beef Shanks and two (2) Fast Eddy 5x13x4mm bearings.
* Requires 350 SLW hub to be compatible with SLW Style Beef Patties.
AR44 / SCX10 II DIFF COVER - BRASS
Our SCX10 II Differential covers are machined from solid brass. Why do you need a brass diff cover? Two reasons; 1. More added weight down low to help lower the center of gravity of your rig, and 2. Better bearing clamping force that is more evenly distributed versus the stock plastic housings! Diff covers can easily be painted or powder coated to the color of your choice. Drilled and tapped to accept the stock hardware. Weight = 1.1 ounces *Each order will receive one SCX10 differential cover only. Parts in picture are for reference only.
SCX10 II / AR44 BEEF TUBES - BRASS - SPLINED
These are an upgrade for the Axial SCX10 II axle housing that benefit the rig in several ways. They add weight down low to help the center of gravity of your rig, enabling you to run less rotating weight in the tires. They also "Beef" up the axle housing itself to help keep from snapping the housing in half. This version also has splined ends which will help eliminate the common issue of the C hub spinning on the stock housing. They will work as both the front and rear axles. You will receive one new axle housing with the Beef Tubes pre-installed.. Team KNK Hardware is included! Tube weight = 1.75 o.z. (50 grams) per set
*Due to the machining required on the axle housing to allow the fitment of the Beef Tubes, we will only offer these pre-installed in a new axle housing.