ELEMENT BEEF TUBES - FRONT - BRASS - SPLINED
These are an upgrade for the Element axle housing that benefit the rig in several ways. They add weight down low to help the center of gravity of your rig, enabling you to run less rotating weight in the tires. They also "Beef" up the axle housing itself to help keep from snapping the housing in half. This version also has splined ends which will help eliminate the common issue of the C hub spinning on the stock housing. You will receive one new axle housing with the Beef Tubes pre-installed.
Tube weight = 1.9 oz. (50 grams) per set
*Due to the machining required on the axle housing to allow the fitment of the Beef Tubes, we will only offer these pre-installed in a new axle housing.
You may also be interested in the following products.
ELEMENT BEEF TUBES - REAR - BRASS
These are an upgrade for the Element rear axle housing that benefit the rig in several ways. They add weight down low to help the center of gravity of your rig, enabling you to run less rotating weight in the tires. They also "Beef" up the axle housing itself to help keep from snapping the housing in half. We have moved the threaded holes for the bearing retaining screws closer to the bearing recess which will actually hold the bearing and not let it pull out like they do in stock fashion. You will receive one new axle housing with the Beef Tubes pre-installed.
Tube weight = 2.8 oz. per set
Click here for installation tips.
*Due to the machining required on the axle housing to allow the fitment of the Beef Tubes, we will only offer these pre-installed in a new axle housing.
ELEMENT BEEF SHANKS - BRASS KNUCKLES
ELEMENT BEEF SHANKS - BRASS KNUCKLES
Our Beef Shanks add a total of 88 grams of weight were it counts, the lowest outer most part of your rig, lowering the overall center of gravity, increasing climbing stability/ability. Another feature that makes Beef Shanks stand above the others is that our design uses a larger and stronger 5x11x4mm outer bearing vs. the stock 5x10x4mm bearing which also increases durability. These are a direct fit to almost any Element c-hub and provide improved performance with increased scale realism.
Features:
- CNC Machined from solid brass
- Uses stock ackerman arms retaining the BTA steering
- Scale fabricated knuckle appearance
- Larger outer bearing (5x11x4mm) for added strength
- Improves CG
- 44 grams each for a total of 88 grams
Includes two (2) Element Beef Shanks, two (2) 5x11x4mm bearings, and necessary hardware.
ELEMENT LOWER LINK/SHOCK MOUNTS - BRASS
Element lower link/shock mounts machined from solid brass. Another wonderful option to add more weight down low to assist with lowering the center of gravity on your rig.
Sold in pairs.
Weight = 22 grams per pair.
*Parts in picture are for demonstration purposes only. You will receive two lower link/shock mounts per order.