ELEMENT BEEF TUBES - REAR - BRASS
These are an upgrade for the Element rear axle housing that benefit the rig in several ways. They add weight down low to help the center of gravity of your rig, enabling you to run less rotating weight in the tires. They also "Beef" up the axle housing itself to help keep from snapping the housing in half. We have moved the threaded holes for the bearing retaining screws closer to the bearing recess which will actually hold the bearing and not let it pull out like they do in stock fashion. You will receive one new axle housing with the Beef Tubes pre-installed.. Team KNK Hardware is included!
Tube weight = 2.8 o.z. per set
Click here for installation tips.
*Due to the machining required on the axle housing to allow the fitment of the Beef Tubes, we will only offer these pre-installed in a new axle housing.
ELEMENT DIFF COVER - BRASS
Our Enduro Differential covers are machined from solid brass. Why do you need a brass diff cover? Two reasons; 1. More added weight down low to help lower the center of gravity of your rig, and 2. Better bearing clamping force that is more evenly distributed versus the stock plastic housings! Diff covers can easily be painted or powder coated to the color of your choice. Drilled and tapped to accept the stock hardware.
Weight = 40 grams (1.4 ounces)
*Each order will receive one Element differential cover only. Parts in picture are for reference only.
ELEMENT BEEF TUBES - FRONT - BRASS - SPLINED
These are an upgrade for the Element axle housing that benefit the rig in several ways. They add weight down low to help the center of gravity of your rig, enabling you to run less rotating weight in the tires. They also "Beef" up the axle housing itself to help keep from snapping the housing in half. This version also has splined ends which will help eliminate the common issue of the C hub spinning on the stock housing. You will receive one new axle housing with the Beef Tubes pre-installed.. Team KNK Hardware is included! Tube weight = 1.9 o.z. (50 grams) per set
*Due to the machining required on the axle housing to allow the fitment of the Beef Tubes, we will only offer these pre-installed in a new axle housing.